PLANT FORMAN

• In direct charge of all Packing, Manufacturing, and Maintenance personnel.
• Direct employees as to their functions and monitors their performance
• Keeps in continuous contact with the QA Manager, informing him/her to any problems or repair actions being taken.
• Decides if production is acceptable after it’s initial setup.
• May stop production or refuse raw material for any reason.

• Responsible for directing and insuring the quality of all tools produced internally or from outside sources.
• Acts as a reference for the determination of any production problems, both in quality and mechanical issues, and also has final say as to how a problem should be corrected.

• Purchases all raw materials used in production.
• Will inspect all incoming materials to insure they are acceptable before going to production and also inspects component material after production to verify consistency in quality.

• Responsible for monitoring the production, quality, and shipment of all components for their respective clients.
• Alerts the QA manager if they feel there is a problem with any production or if the customer has made any recommendations or inquiries.

• Supervises the packing and shipment of all components.
• Verifies that the packing and loading of a shipment conforms to the customers standards and safety requirements.

MANUFACTURING

A) SETUP PERSONNEL

• Responsible for the initial setup of a press and verification that the part is running within spec.
• Will monitor all presses constantly, measuring and visually inspecting components throughout the day to insure consistent quality.
• Report on and repair any detected problems.

B) PRESS OPERATORS

• Responsible for the operation of the presses.
• Will constantly monitor the metal and components through physical and visual inspection to insure the run is problem free.
• Reports any problems to any manager or foreman.

• Responsible for moving parts from the production are to the packing area and preparing them for shipment.
• Packers will make one final visual inspection of the components in a box before sealing the box.

• Responsible for overall maintenance of the facilities, including any machinery.